Attempts at Argyle

So, the argyle golf club cozies I'm making...yeah...um, they may take a little longer than I thought. I thought the 6.5 inches of 1x1 ribbing on size 5 needles would be the tough part! The colorwork is harder than I originally thought it would be, and I think that's particularly because it's argyle. There are places with several color switches, there are big blocks of color. Plus, it's in the round. The instructions specified to knit it flat and then seam up the side. I don't like seeming, I have all these nice shiny new circulars, so I thought I'd be clever and knit it in the round.

Fast forward to the argyle. I didn't realize color working technique would be an issue, and I certainly didn't think it would be that much more difficult in the round. I figured...well ok I'll just carry the yarn in the back and use it when I come to a color I need it for. I think that's called stranding, and is usually used with fair isle where you are constantly alternating between 2 colors. Problem is I was working with 3 colors, and some places I use one color every 15 spaces or so. That leaves a long loose strand hanging in the back. You have to leave enough slack to not distort the fabric. Even if you do that, your fabric can't stretch beyond the length of that strand, and you can't make it too loose or else the stitches will be loose on the front side, and the loops on the back may get caught on things. I did this for 2 rounds before I realized this was a problem. Maybe it's not so bad flat, but doing this using Magic Loop for a round item, I wasn't leaving enough slack at the turn, and my cozy was going to be permanently nipped in on 2 sides.

Okay, so that doesn't work and I tink back. I look up information and they say you usually use intarsia for argyle color work. No problem, I'll cut up my yarn and make bobbins even though I was trying to avoid doing that. I go for another 2 rounds and I'm all proud of myself for understanding the yarn twist at the color changes before I realize I'm running into a problem similar to the fair isle where the yarn is being stranded in the back. I finish series of stitches in a color, and since I'm working in the round, the next time I get to that section the yarn is on the far end and I need to pull it across the back so I can use the color on the beginning. That didn't seem right. I research some more and apparently intarsia is not meant for things worked in the round! When you knit flat, the yarn is in the correct place when you go backwards on the flip side.

Luckily there are a lot of websites and blogs that have dealt with this issue. They usually involve wrapping the yarn when you reach the beginning of the round, and then reversing your knitting and knitting along the back side. Apparently learning to knit backwards is awesome for this purpose (Knitty has an article on this).